Type 8550-1900 CAT PWM
COMMAND MODULE
The Type 8550-1900 Cat PWM Command Module is used to provide an engine throttle signal or basic control logic for Cat electronic engines. It accepts a standard analog input and outputs a variable-duty-cycle, pulse-width-modulated signal (PWM). The duty cycle of the signal determines the desired speed of the engine.
APPLICATIONS
- Simple control system for
vessels with CAT electronic engines driving fixed pitch propellers
- CAT pulse width modulated
(PWM) throttle signal conditioner
FEATURES
- Potentiometer input
- 4 to 20 mA input
- Pulse width modulated output
- Open collector outputs
- ModBus RTU
- Switch selectable RS-232, RS-422 or RS-485 communication
- Switch selectable communication termination
- Dual 12 VDC or 24
VDC nominal power supplies
- Status LEDs indicate data transfer
- Status LED for watch dog
- Diagnostic LED flashes error codes
- Removable terminal blocks
- TS 35 x 7.5 rail mount
Specifications
Supply:
- Nominal 12 VDC, or 24
VDC
- Nominal 12 VDC range 9 to 36
VDC
- Nominal 24 VDC range 18 to 36
VDC
- Reverse voltage protection
- Nominal 50 mA, peak 150 mA
Environmental:
- Operating temperature -25 to +70°C
- Storage temperature -40 to +85°C
- Vibration: Frequency range
2 to 100 Hz
Peak to peak amplitude 2 mm below 13.2 Hz
Acceleration amplitude 0.7 g above 13.2 Hz
- CE compliant for EMC
(IEC/EN60945)
Physical:
- IP40 case (NEMA Type 1)
- Dimensions:
90 mm L × 75 mm W × 55 mm H (without gasket)
(3.54" L × 2.95" W × 2.17" H)
- Weight, typical 0.15 kg (0.32 lbs)
- Removable terminal blocks for 14 to 20 AWG wires
Diagnostics:
- Watchdog LED
- Open collector output for fault
- Diagnostic fault LED flashes error codes
- Tx & Rx activity LEDs
- ModBus RTU Slave access to fault codes, operating data and configuration
Inputs / Outputs:
- Command potentiometer 2.5 kW or 5 kW
- Command 4 to 20 mA
- Pulse Width Modulated 500 pulses per second (PWM)
- Open collector outputs 1 A @ 24
VDC
- ModBus RTU
- Communication RS-232 / RS-422 / RS-485
Downloads
|
Type
8550-1900 Cat PWM Command Module Product Bulletin SB-8550-1900 |
Typical Installations
Home |
PRIME MOVER
CONTROLS INC.
3600 GILMORE WAY, BURNABY B.C.
CANADA V5G 4R8
TEL (604) 433-4644 FAX (604)
433-5570 email:info@pmc-controls.com |
|
|